Request a Quote on Clarostat Sensors And Controls Part Number CM45839 with NSN 5905013420717!

Part Number: CM45839

Manufacturer: Clarostat Sensors And Controls

NSN: 5905-01-342-0717

NIIN: 013420717

Item Name : Resistor Variable Nonwire Wound

CAGE Code: 12697

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 01

Welcome to The NSN Distributor, where we prioritize providing our customers with a wide range of high-caliber NSN part options, all of which have been sourced from top global manufacturers that have been vetted and placed on our Approved Vendor List (AVL). You have taken an interest in Clarostat Sensors And Controls part number CM45839 with NSN 5905013420717, one of the millions of components available in our expansive inventory. As a part of our commitment to quality, all Resistor Variable Nonwire Wound products are tested, inspected, and more to guarantee their reliability prior to purchase. Moreover, parts are shipped alongside their applicable manufacturing trace documentation and qualifying certifications to ensure their authenticity.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

Our inventory is replete with top-quality NSN parts like those with the FSC 5905 Resistors and NSN 5905-01-342-0717. For additional specifications regarding your product needs, you can also search for items by their CAGE code, such as 12697, and many other designations. Once you have had time to browse through our selection of Clarostat Sensors And Controls parts and more, we invite you to take advantage of our RFQ service by requesting a quote for your comparisons on parts of interest. As you fill out the form on this page, be sure to include relevant details like your desired part quantity and expected delivery date so an account manager can calculate a quote that has been customized to your specifications. Kick off the procurement process with the submission of the form below to see why customers continue to rely on The NSN Distributor for all their operational needs.

NSN Information for Part Number CM45839 with NSN 5905-01-342-0717, 5905013420717

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-342-0717 Item Description: Resistor Variable Nonwire Wound	5905	013420717	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			G
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
Cm45839	5	2	5

Characteristics Data of NSN 5905-01-342-0717, 5905013420717

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	RECTANGULAR BUSHING MOUNTED
ABJT	TERMINAL LENGTH	0.250 INCHES MINIMUM
ABXF	SHAFT LENGTH	1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
ADAQ	BODY LENGTH	0.781 INCHES NOMINAL
ADAT	BODY WIDTH	0.475 INCHES MINIMUM AND 0.525 INCHES MAXIMUM
ADAU	BODY HEIGHT	0.500 INCHES NOMINAL
AEDX	SHAFT STYLE	ROUND
AEEA	SWITCH TYPE	PUSH-PULL
AEED	SWITCH VOLTAGE RATING IN VOLTS	30.0
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFK	MAXIMUM STARTING TORQUE	3.00 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	3.00 INCH-OUNCES
AEFN	NONTURN DEVICE LOCATION	AT 4 OCLOCK AND AT 8 OCLOCK
AEFP	NONTURN DEVICE RADIUS	0.500 INCHES NOMINAL
AEGJ	SWITCH CONTACT ARRANGEMENT	SINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED
AFJN	III FRAGILITY FACTOR	MODERATELY RUGGED
AGAV	III END ITEM IDENTIFICATION	5895-01-233-2919 COMMUNICATION SYSTEM CONTROL GROUP
AJYN	SCREW THREAD DIAMETER	0.250 INCHES NOMINAL
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0
APXH	TERMINAL LOCATION	LOWER ADJACENT SIDE SINGLE ROW
CBBL	FEATURES PROVIDED	HUMIDITY PROOF AND SWITCH
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 FREE AIR SINGLE SECTION
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
PMLC	III PRECIOUS MATERIAL AND LOCATION	TERMINAL SURFACES GOLD
TEST	TEST DATA DOCUMENT	57045-D6002921 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
AEFM	MAXIMUM STOP TORQUE	48.00 INCH-OUNCES
AEGH	SWITCH OPERATING POSITION	ANY POSITION OF ROTATION TRAVEL
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS
ABWV	SHAFT DIAMETER	0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
ADAP	MOUNTING BUSHING LENGTH	0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF
PRMT	III PRECIOUS MATERIAL	GOLD
AEDZ	SHAFT BEARING TYPE	SLEEVE
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	290.0 MINIMUM AND 300.0 MAXIMUM
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.200 INCHES NOMINAL
AXGY	MOUNTING METHOD	STANDARD BUSHING
CBME	III CUBIC MEASURE	0.195 CUBIC INCHES
CQCC	ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS SINGLE SECTION
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	290.0 MINIMUM AND 300.0 MAXIMUM
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.100 INCHES NOMINAL
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-150.0 TO 150.0 SINGLE SECTION
CSDK	SWITCH CURRENT TYPE AND RATING IN AMPS	0.250 DC