Request a Quote on Clarostat Sensors And Controls Part Number CM45002 with NSN 5905012343061!

Part Number: CM45002

Manufacturer: Clarostat Sensors And Controls

NSN: 5905-01-234-3061

NIIN: 012343061

Item Name : Resistor Variable Nonwire Wound

CAGE Code: 12697

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 01

Welcome to The NSN Distributor, where we prioritize providing our customers with a wide range of high-caliber NSN part options, all of which have been sourced from top global manufacturers that have been vetted and placed on our Approved Vendor List (AVL). You have taken an interest in Clarostat Sensors And Controls part number CM45002 with NSN 5905012343061, one of the millions of components available in our expansive inventory. As a part of our commitment to quality, all Resistor Variable Nonwire Wound products are tested, inspected, and more to guarantee their reliability prior to purchase. Moreover, parts are shipped alongside their applicable manufacturing trace documentation and qualifying certifications to ensure their authenticity.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

Our inventory is replete with top-quality NSN parts like those with the FSC 5905 Resistors and NSN 5905-01-234-3061. For additional specifications regarding your product needs, you can also search for items by their CAGE code, such as 12697, and many other designations. Once you have had time to browse through our selection of Clarostat Sensors And Controls parts and more, we invite you to take advantage of our RFQ service by requesting a quote for your comparisons on parts of interest. As you fill out the form on this page, be sure to include relevant details like your desired part quantity and expected delivery date so an account manager can calculate a quote that has been customized to your specifications. Kick off the procurement process with the submission of the form below to see why customers continue to rely on The NSN Distributor for all their operational needs.

NSN Information for Part Number CM45002 with NSN 5905-01-234-3061, 5905012343061

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-234-3061 Item Description: RESISTOR,VARIABLE,NONWIRE WOUND,	5905	012343061	0	N	B
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		B	A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
CM45002	2	2	3

Characteristics Data of NSN 5905-01-234-3061, 5905012343061

MRC	Criteria	Characteristic
ABNC	FLAT HEIGHT	0.220 INCHES MAXIMUM
AJYN	SCREW THREAD DIAMETER	0.375 INCHES NOMINAL
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION
ADAV	III OVERALL DIAMETER	1.094 INCHES NOMINAL
CSDL	STANDARD TAPER CURVE PER SECTION	A SINGLE SECTION
SR-1	SPEC/STD CONTROLLING DATA
SR-1	MFR SOURCE CONTROLLING REFERENCE	380-10035-503
APXH	TERMINAL LOCATION	REAR-BOTTOM
ABHP	III OVERALL LENGTH	1.941 INCHES NOMINAL
CBME	III CUBIC MEASURE	1.824 CUBIC INCHES
AEDX	SHAFT STYLE	ROUND, FLATTED
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	120.0 SINGLE SECTION
AEEA	SWITCH TYPE	ROTARY
AEED	SWITCH VOLTAGE RATING IN VOLTS	117.0
ABPM	BODY DIAMETER	1.094 INCHES NOMINAL
AEDZ	SHAFT BEARING TYPE	SLEEVE
ABXF	SHAFT LENGTH	0.910 INCHES NOMINAL
AEGJ	SWITCH CONTACT ARRANGEMENT	SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED
AFJN	III FRAGILITY FACTOR	MODERATELY RUGGED
ZZZK	SPECIFICATION/STANDARD DATA	82918-380-10035 MANUFACTURERS SOURCE CONTROL
TEST	TEST DATA DOCUMENT	82918-380-10035 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED
AEFD	ACTUATOR TYPE	SINGLE SHAFT
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS
CBBL	FEATURES PROVIDED	PANEL SEAL AND SHAFT SEAL AND SWITCH
AEFK	MAXIMUM STARTING TORQUE	4.00 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	4.00 INCH-OUNCES
ABNB	FIRST FLAT LENGTH	0.438 INCHES MINIMUM
AEFM	MAXIMUM STOP TORQUE	12.00 INCH-OUNCES
AEFP	NONTURN DEVICE RADIUS	0.531 INCHES NOMINAL
AEFN	NONTURN DEVICE LOCATION	AT 9 OCLOCK
ABWV	SHAFT DIAMETER	0.251 INCHES MAXIMUM
AEGH	SWITCH OPERATING POSITION	START OF ROTATION
AAPN	SECTION QUANTITY	1
ADAP	MOUNTING BUSHING LENGTH	0.375 INCHES NOMINAL
AXGY	MOUNTING METHOD	STANDARD BUSHING
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0
CSDK	SWITCH CURRENT TYPE AND RATING IN AMPS	3.000 AC
TTQY	TERMINAL TYPE AND QUANTITY	5 TAB, SOLDER LUG
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	340.0 MAXIMUM
ADAQ	BODY LENGTH	0.828 INCHES NOMINAL
CQDB	RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT	-3.0 TO 0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 -25 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 25 DEG CELSIUS SINGLE SECTION AND 0.0 TO 3.0 120 DEG CELSIUS SINGLE SECTION
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
SR-1	MANUFACTURERS CODE	82918